![]() Define a coordinate system, controller, etc.High-Level Overview of How to Use SolidCAMĭesign your SolidWorks model with an understanding of the relevant machining tools, processes, fixtures, and constraints for your part. Coordinate system (often different from the SolidWorks part coordinate system).The SolidCAM interface consists of the following: Instead, open Windows Explorer, navigate to the saved file’s directory, and double click on your CAM-part (.PRT file). DO NOT try to open your CAM-part from the CAM-Parts dialog box-chances are you won’t be able to locate it. From the main menu bar, navigate to SolidCAM > Open. SolidCAM, the leading integrated CAM software, runs directly inside SOLIDWORKS, with seamless integration and full tool-path associativity. To open an existing CAM-part, first open SolidWorks. It is recommended that you save your CAM-part in the same directory as your SolidWorks model (check “Use Model file directory”). The “New Milling Part” dialog box will open in order to name your part. Now, from the SolidWorks main menu, create a new SolidCAM milling part by navigating to SolidCAM > New > Milling. Navigate to the Units heading and ensure that Inch is toggled on. To do this, from the SolidWorks main menu bar, select SolidCAM > SolidCAM Settings…. You’ll want to check your SolidCAM unit settings before creating a new part. To start a new CAM-part from an existing SolidWorks part, first open your part in SolidWorks. Opening SolidCAM and Starting a New CAM-part (or loading a saved CAM-part) If the SolidWorks model is updated, SolidCAM will reflect the changes automatically or give you the option to synchronize parts. This applies to CAM-part’s the Stock and Target bodies. A SolidWorks assembly (.SLDASM) – an assembly of the DesignModel.SLDPRT and CAM.SLDPRTīecause SolidCAM works within SolidWorks, a CAM-part maintains associativity with the SolidWorks model that it was built from.CAM.SLDPRT – A SolidWorks part containing the SolidCAM Coordinate System and geometry data.DesignModel.SLDPRT – A copy of the original SolidWorks part used the create the CAM-part.A subdirectory (in this case called Cavity) – this contains all data generated from the CAM-part.PRT file – This is the SolidCAM equivalent of a. A new SolidCAM file is called a CAM-part.
0 Comments
Leave a Reply. |